FINISHINGS

THERMOPLASTIC BINDERS

 

curtidos 1
curtidos 2
curtidos 3
 

POLIURETHANE

CROMELASTIC 6200
Thermoplastic binder. Provides a medium film without sticky touch.
REGEL U 102 N
Aliphatic Polyurethane. Provides a hard and shiny film.
REGEL U 105 PG

Aliphatic Polyurethane. Provides a notably soft and thermoplastic film.

REGEL U 106 N

Aliphatic Polyurethane. Provides very hard films. Recommended for high brightness.

REGEL U 107 N
Aliphatic polyurethane. Forms very soft films with high elongation.
REGEL U 109 N

Aromatic Polyurethane, medium hardness, specially recommended for thermoplastic finishes in combination with acrylic resins. Not suitable for white articles.

REGEL U 110 N

Aliphatic Polyurethane, medium hardness. Can be recommended as unique or main binder in those finishes that require high physical and chemical properties (friction solidity, anchorage, flexometry, etc.).

REGEL U 119 N

Aliphatic Polyurethane, medium-soft hardness. Suitable for all kind of finishing. Good engraving retention characteristics. Gummy touch.

REGEL U 121 N

Hard Aliphatic Polyurethane, very bright for a brightness layer.

REGEL U 122 N

Thermoplastic binder. Provides a medium hard film, elastic and very bright, which makes it specially suitable as a brightness layer for those finishes which require these characteristics.

REGEL U 125 N

Aromatic Polyurethane, extremely soft. Specially indicated to improve anchorage.

REGEL U 129 N

Aliphatic polyurethane of medium-soft hardness. It is recommended for all kind of finishings in which high flexometries are required, such as in corrected grain or brush-off.

REGEL U 132 N

Hard and elastic Aliphatic Polyurethane, very bright for brightness layer and good flexometry.

REGEL U 136 N

Aliphatic Polyurethane. Confers appreciable resistance in flexometric tests.

REGEL U 137 N

Aqueous microdispersion of an aliphatic polyurethane. It gives a remarkably soft and thermoplastic film. It can be used also as a surface impregnation for soft footwear leathers or as a covering pre-bottoming with FILLER MCA.

REGEL U 138 MA

Aliphatic Polyurethane aqueous dispersion. Provides a hard, elastic and matt film.

REGEL U 138 N
Aqueous aliphatic polyurethane dispersion, provides a very high gloss, hard and elastic film. It can be used as final lacquer in items like similar patent-leather.
REGEL U 146 N

Thermoplastic binder. Universal resin suitable for a wide variety of finishes.

REGEL U 147 PRG

Specially suitable for finishes that require a high level of brightness and softness.

REGEL U 148 BASE

Thermoplastic Binder. REGEL U-148-Base is a soft Aliphatic Polyurethane aqueous dispersion with very fine particles.

REGEL U 148 N

Thermoplastic Binder. Polishable polyurethane with fine particle size for natural finishing.

REGEL U 150 N

Cationic Aliphatic Polyurethane in aqueous dispersion. Extremely soft, fails to film. It is used as full flower impregnation.

REGEL U 155 N

Thermoplastic Binder. Modified Aliphatic Polyurethane aqueous dispersion. Totally reacted with medium hardness.

REGEL U 156 N

Aliphatic Polyurethane aqueous dispersion, provides a hard, elastic and very bright film. Can be used as final lacquer.

REGEL U 160 SP
Thermoplastic Binder. REGEL U-160-SP provides a soft and thermoplastic film.
REGEL U 162 N
REGEL U 163 N
Thermoplastic binder. Provides a medium film, non sticky and gummy touch.

REGEL U 169 N

Thermoplastic binder. It offers a good performance for bottom with a medium soft film, with excellent resistance to the break and the flexion in cold.

REGEL U 196 N
Aqueous aliphatic polyurethane dispersion that provides a notably soft and also thermoplastic film.
REGEL U 201 N
Polyurethane with medium-soft hardness, suitable for bottoms and tops. 
REGEL U 202 N
Polyurethane with medium-soft hardness, suitable for bottoms and tops.
REGEL U 203 N
Dull polyurethane for top coats requiring high resistances such as the upholstery leather for furniture.
REGEL U 207 N
Dull polyurethane for top coats requiring high resistances such as the upholstery leather. It provides very good feel.
REGEL U 210 N
Thermoplastic binder. Forms an elastic medium soft dull film specially suitable for base and Topcoat.
REGEL U 990 C
Cationic polyurethane that forms hard films. 
REGEL U 995 C
Medium cationic polyurethane. It may be used in polishing pre-bottoms and bottoms.
REGEL U 996 BASE
Thermoplastic binder. Aqueous dispersion of  soft cationic aliphatic polyurethane.
REGEL U 996 C
Aqueous dispersión of soft cationic aliphatic polyurethane. Polishable with fine particle size for natural finishing.
UNICRYL IMP
Thermoplastic binder. Designed for the impregnation of buffed leathers and splits.

ACRYLIC RESIN

CRYBOND P 20
An impregnation resin for leather finishing. Provides an important advantage as far as the break and looseness of the grain are concerned, since it does not harden the leather.
CRYBOND P 8
Extremely fine particle size polymer for full grain impregnation and natural items.
INTRAFIN BT
Thermoplastic season. Acrylic polymer complex.
INTRAFIN F
Pre-bottoms or bottom for splits, corrected grain and low choice of leathers to cover imperfections improving the final classification. It is indispensable to plate at minimum 110ºC to expand the film and give a high level of upgrading.
INTRAFIN FB
Soft and with good feel pre-bottoms for splits, corrected grain and low choice of leathers to cover imperfec­tions improving the final classification. It is indispensable to plate at minimum 110ºC to expand the film and give a high level of upgrading.
INTRAFIN MS2
Pre-bottom for corrected grain and low choice of leathers to cover imperfections improving the final classification. 
INTRAFIN SM
Pre-bottoming particularly designed for corrected grain low-grade leathers. It has a remarkable power to hide the grain flaws and therefore to improve the final grading.
INTRAFIN SP
It is considered a covering pre-bottoming that improves the leather grading. It is used in the form of a paste and applied on the flaw by means of a spatula, to cover the defect and then is buffed and finished through the usual method.
INTRAFIN SPC
Buffable binder for corrected grain and low choice of leathers to cover imperfections improving the final clas­sification. It can be used by spatula and afterwards if buffed. 
UNICRYL AS 111
Acrylic emulsion for covering mixtures and for improving of anchorage. It gives a very natural appearance. 
UNICRYL AS 200
Acrylic emulsion. It is an all-purpose resin, that forms soft and elastic films. 
UNICRYL AS 222
All-purpose resin with fine particle, for a good penetration and a natural finishings. 
UNICRYL AS 333
Urethane-acrylic polymer. Good binding power for pigments and dyestuffs.
UNICRYL C  0591
Acrylic copolymer, specially designed for finishing “break” type. 
UNICRYL C  100 MAT
Dull acrylic emulsion which forms a medium soft dull film. 
UNICRYL C 106
Thermoplastic binder.
UNICRYL C 130
Medium hard thermoplastic binder and whose field of application is very wide no sticky and excellent print retention.
UNICRYL C 181
Acrylic polymer. Resin for finishings that require high flexometry, having a very good filling and sealing power.
UNICRYL C 231

UNICRYL C 900
Due to its chemical characteristics, this product gives finishes with excellent water and solvent resistances.

BUTADIENIC

UNICRYL 0391
Butadiene polymer. High filling power and a good embossing behavior. Excellent flexometry.

COMPOUNDS

COMPOUND 15 A
It is a compact to be used in buffed leather, that forms very soft and resistant films, with high covering power. 
COMPOUND 18 A
It is a compact to be used in high buffed cow leather or  bufalo , that forms very soft and resistant films, with high covering power with excellent print retention at hight temperature. 
COMPOUND 7L
Thermoplastic binder to use in full grain or buffed leather, that forms soft, resistant films, with covering power.
COMPOUND 861
All-purpose compound that forms medium soft and resistant. Very covering product.
COMPOUND 862
All-purpose covering compound.
COMPOUND 8L
It is a compact to be used in full grain leather or slightly buffed, that forms very soft and resistant films, with high covering power.
COMPOUND 9 M
All-purpose covering compound with good feeling for full or smooth buffed grain.
COMPOUND CAT NA
Cationic compound for pre-bottom and covering base-coat, giving a natural look. 
COMPOUND CRG
OMPOUND CRG is an all-purpose resin that forms medium soft, dull and resistant films, with very cove­ring power specially employed for corrected grain like “Brush-off” and Sebago ítems.

 

Las familias en Estados Unidos que se enfrentan a varios problemas de salud, estas personas pueden obtener medicamentos sin receta en lnea. La violación de la función erctil, definida como el persistente fracaso para mantener una erecciуn al orgasmo, influye en unos 15 a 30 millones de gente en la Amrica solamente. Si usted est' interesado en Kamagra, tal vez desee aprender acerca de zithromax 500 mg. Absolutamente, hay algunos asuntos que usted tiene que considerar sobre l. Hay muchas otras preguntas sobre el medicamento. En su conjunto, cuando la gente habla de la disfunciуn erctil. De todas las cosas en el campo de la salud pblica que m's llaman nuestra atenciуn, es ED, particularmente zitromax 500 prospecto. No hay dudas, para muchas personas, plantear el problema en primer lugar es el paso m's difcil. No olvide, la nica manera de evitar las drogas suposititious es pedir remedios de la prescripciуn como Kamagra de un servicio en lnea respetado con el cual usted es familiar.